User Manual

Voltage High Alarm High Warning Low Warning Low Alarm
Interface (V) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.9 3.28 3.60 3.50 3.10 3.00
port1.10 3.28 3.60 3.50 3.10 3.00
Current High Alarm High Warning Low Warning Low Alarm
Interface (mA) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.9 6.0 25.0 20.0 2.0 1.0
port1.10 7.0 25.0 20.0 2.0 1.0
TX-Power High Alarm High Warning Low Warning Low Alarm
Interface (dBm) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.9 -6.4570 -3.0008 -4.0001 -9.5001 -10.5012
port1.10 -6.0102 -3.0008 -4.0001 -9.5001 -10.5012
RX-Power High Alarm High Warning Low Warning Low Alarm
Interface (dBm) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.9 -40.0000 -2.0004 -3.0008 -17.0115 -18.0134
port1.10 -40.0000 -2.0004 -3.0008 -17.0115 -18.0134
5.1.16 Set SFP module optical reception level monitoring
[Syntax]
sfp-monitor rx-power action
no sfp-monitor rx-power
[Parameter]
action : Operations for SFP module optical reception level monitoring
Setting value Description
enable
Enables SFP module optical reception level
monitoring
disable
Disables SFP module optical reception level
monitoring
[Initial value]
sfp-monitor rx-power enable
[Input mode]
global configuration mode
[Description]
Sets the monitoring of SFP module optical reception levels.
[Example]
Disable SFP module optical reception level monitoring.
SWR2311P(config)#sfp-monitor rx-power disable
5.2 Link aggregation
5.2.1 Set static logical interface
[Syntax]
static-channel-group link-id
no static-channel-group
[Parameter]
link-id : <1-96>
static logical interface number
Command Reference | Interface control | 133