User Manual

Interfaces that make up the LACP logical interface
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
If ifname is omitted, shows the status of the LACP logical interface.
The following items are shown for each LACP logical interface that exists.
• LACP logical interface name
•
Load balance function rules
• Interface name of associated LAN/SFP port
For details on the load balance function rules, refer to the type parameter of the port-channel load-balance command.
If ifname is specified, shows the status of the LAN/SFP port that make up the LACP logical interface.
The following items are shown.
Item Description
Etherchannel portN.N LAN/SFP port name
Physical admin key
Key that identifies physical characteristics (created from
bandwidth, duplex, mru, and VLAN structure)
Receive machine state
Status of the LACP protocol Receive machine transition
variable
• "Invalid"
•
"Initialize"
• "Port disabled"
• "LACP disabled"
• "Expired"
• "Defaulted"
• "Current"
Periodic Transmission machine state
Status of the LACP protocol Periodic Transmission transition
variable
• "Invalid"
• "No periodic"
• "Fast periodic" (transmitted at one-second intervals)
• "Slow periodic" (transmitted at 30 second intervals)
• "Periodic"
Mux machine state
Status of the LACP protocol Receive machine transition
variable
• "Detached"
• "Waiting"
• "Attached"
• "Collecting/Distributing"
Selection
Usage status
• "Selected"
• "Unselectedic"
• "Standby"
Information Refer to the table below (Actor is self, Partner is other party)
Aggregator ID Distinguishing ID on LACP
Information shows the following items.
Item Description
LAG LACP system ID (priority, MAC address)
Admin Key ID that is the basis of the LACP key (logical port number)
Port priority LACP port priority order
136 | Command Reference | Interface control