User Manual

ID 4727
Status Not ready
Partner LAG 0x8000, 00-a0-de-11-11-11
Partner Key 0001
Link count 0/ 1
SWR2311P#show etherchannel status detail
Aggregator po1
ID 4601
Status Ready
Actor LAG 0x8000, 00-a0-de-e0-e0-e0
Admin Key 0001
Partner LAG 0x8000, 00-a0-de-11-11-11
Partner Key 0001
Link count 1/ 1
Link
port1.1 Selected Synchronized yes
Aggregator po2
ID 4602
Status Ready
Actor LAG 0x8000, 00-a0-de-e0-e0-e0
Admin Key 0002
Partner LAG 0x8000, 00-a0-de-11-11-11
Partner Key 0001
Link count 0/ 1
Link
port1.2 Selected Synchronized no
port1.3 Unselected Synchronized no
Aggregator po127
ID 4727
Status Ready
Actor LAG 0x8000, 00-a0-de-e0-e0-e0
Admin Key 0127
Partner LAG 0x8000, 00-a0-de-11-11-11
Partner Key 0001
Link count 0/ 1
Link
port1.4 Selected Synchronized no
5.2.12 Set LACP port priority order
[Syntax]
lacp port-priority priority
no lacp port-priority
[Parameter]
priority : <1-65535>
LACP port priority order
Lower numbers have higher priority
[Initial value]
lacp port-priority 32768
[Input mode]
interface mode
[Description]
Sets the LACP port priority order.
If this command is executed with the "no" syntax, the setting returns to the default value.
[Note]
If up to eight LAN/SFP ports are combined into an LACP logical interface, they are immediately combined into the LACP
logical interface; ports in excess of eight are standby ports used in case of a malfunction.
In such cases, the priority order between the LAN/SFP ports are evaluated, and they are combined starting with the
highestpriority port.
The priority order is evaluated as follows.
1 ) Priority is given to ports with a lower LACP port priority.
142 | Command Reference | Interface control