User Manual

ManualsBrandsYamaha ManualsProfessional Audio DevicesL2 Switch

151

152

153

154

155

156

157

158

159

160

5.3.16 Set the reply wait time for the RADIUS server overall

[Syntax]

auth timeout server-timeout time

no auth timeout server-timeout

[Parameter]

time : <1-65535>

Reply wait time from the authentication server for the authentication request (seconds)

[Initial value]

auth timeout server-timeout 30

[Input mode]

interface mode

[Description]

Sets the reply wait time for the RADIUS server overall when authenticating a port of the applicable interface.

If this command is executed with the "no" syntax, the setting returns to the default.

[Note]

This command can be specified only for both LAN/SFP port and logical interface.

The value for this setting must be at least equal to (setting of radius-server timeout command) x (setting of radius-server

retransmit command + 1) x (number of radius servers).

To use this command, you must enable the port authentication function for the applicable interface. (dot1x port-control

command, auth-mac enable command, auth-web enable command)

[Example]

This sets the reply wait time to the RADIUS server overall to 180 seconds, for authentication requests from LAN port #1.

SWR2311P(config)#interface port1.1

SWR2311P(config-if)#auth timeout server-timeout 180

5.3.17 Set supplicant reply wait time

[Syntax]

auth timeout supp-timeout time

no auth timeout supp-timeout

[Parameter]

time : <1-65535>

Supplicant reply wait time (seconds)

[Initial value]

auth timeout supp-timeout 30