User Manual

Authentication Port : 1645
Secret Key : fghij
Timeout : 5 sec
Retransmit Count : 3
Deadtime : 0 min
5.3.29 Settings for redirect destination URL following successful Web authentication
[Syntax]
auth-web redirect-url url
no auth-web redirect-url
[Parameter]
url : Single-byte alphanumeric characters and single-byte symbols (maximum 255 characters)
Redirect destination URL
[Initial value]
no auth-web redirect-url
[Input mode]
global configuration mode
[Description]
Specifies the URL to redirect to after successful Web authentication.
If this is executed with the "no" syntax, disables the redirect function after authentication.
[Note]
URLs that include question marks ("?") cannot be specified.
[Example]
Specify the redirect destination after successful Web authentication as http://192.168.100.200.
SWR2311P(config)#auth-web redirect-url http://192.168.100.200
5.3.30 Clear the authentication state
[Syntax]
clear auth state [all] [interface ifname] [mac-addr]
[Keyword]
all : Clears the authentication state for all supplicants
interface : Clears the authentication state for supplicants connected to specific interfaces
[Parameter]
ifname : Interfacee name
Interface to clear
mac-addr : hhhh.hhhh.hhhh (h is hexadecimal)
Applicable MAC address
[Input mode]
priviledged EXEC mode
[Description]
Clears the supplicant authentication state.
[Example]
Clear the authentication state for supplicants connected to LAN port #1.
SWR2311P#clear auth state interface port1.1
5.3.31 Setting the time for clearing the authentication state (system)
[Syntax]
auth clear-state time time
158 | Command Reference | Interface control