User Manual

[Parameter]
watts : <0-30>
Guard band value (W)
[Initial value]
power-inline guardband 7
[Input mode]
global configuration mode
[Description]
Sets the guard band.
The guard band serves as a margin in respect to the overall power supply amount, preventing unintended interruptions in power.
If the amount of usable power is equal to or less than the guard band, power will not be supplied even if a new PD device is
connected to PoE port.
The guard band will not operate if “0W” is specified.
If this command is executed with the "no" syntax, the setting returns to the default.
[Example]
Sets the guard band to 30W.
SWR2311P(config)#power-inline guardband 30
Disables the guard band.
SWR2311P(config)#power-inline guardband 0
Resets the guard band to default values.
SWR2311P(config)#no power-inline guardband
5.6.6 Show PoE power supply information
[Syntax]
show power-inline
show power-inline interface ifname
[Parameter]
ifname : PoE port
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows the PoE port power supply information.
Specifying ifname will show detailed information for the specific PoE port.
[Example]
Show PoE power supply information.
SWR2311P#show power-inline
Show power supply information for port1.1.
SWR2311P#show power-inline interface port1.1
Command Reference | Interface control | 167