User Manual

[Example]
Move to MST mode.
SWR2311P(config)#spanning-tree mst configuration
SWR2311P(config-mst)#
6.3.16 Generate MST instance
[Syntax]
instance instance-id
no instance
[Parameter]
instance-id : <1-15>
Instance ID
[Initial value]
none
[Input mode]
MST mode
[Description]
Generates an MST instance.
If this command is executed with the "no" syntax, the MST instance is deleted.
[Note]
MST instance generation and association with a VLAN is specified by the instance vlan command.
[Example]
Generate MST instance #1.
SWR2311P(config)#spanning-tree mst configuration
SWR2311P(config-mst)#instance 1
6.3.17 Set VLAN for MST instance
[Syntax]
instance instance-id vlan vlan-id
no instance instance-id vlan vlan-id
[Parameter]
instance-id : <1-15>
Instance ID
vlan-id : <2-4094>
VLAN ID set by the vlan command
[Initial value]
none
[Input mode]
MST mode
[Description]
Associates a VLAN with an MST instance.
If this command is executed with the "no" syntax, the VLAN association for the MST instance is deleted. If as a result of this
deletion, not even one VLAN is associated with the MST instance, the MST instance is deleted.
If you specify an MST instance that has not been generated, the MST instance will also be generated.
[Note]
You cannot specify a VLAN ID that is associated with another MST instance.
[Example]
Associate VLAN #2 with MST instance #1.
194 | Command Reference |
Layer 2 functions