User Manual

[Description]
Clears the neighbor cache.
[Note]
[Example]
Clear the neighbor cache.
SWR2311P#clear ipv6 neighbors
7.9 IPv6 forwarding control
7.9.1 IPv6 forwarding settings
[Syntax]
ipv6 forwarding switch
no ipv6 forwarding [switch]
[Parameter]
switch : IPv6 packet forwarding settings
Setting value Description
enable Enable forwarding of IPv6 packets
disable Disable forwarding of IPv6 packets
[Initial value]
ipv6 forwarding disable
[Input mode]
global configuration mode
[Description]
Enables or disables forwarding of IPv6 packets.
If this is executed with the "no" syntax, the setting returns to the default.
7.9.2 Show IPv6 forwarding settings
[Syntax]
show ipv6 forwarding
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows the IPv6 packet forwarding settings.
[Example]
Shows the IPv6 packet forwarding settings.
SWR2311P>show ipv6 forwarding
IPv6 forwarding is on
7.10 IPv6 ping
7.10.1 IPv6 ping
[Syntax]
ping6 host [repeat count]
[
size datalen] [timeout timeout]
[Keyword]
repeat : Specifies the number of times to execute
size : Specifies the length of the ICMPv6 payload (byte units)
timeout : Specifies the time to wait for a reply after transmitting the specified number of Echo requests
218 | Command Reference |
Layer 3 functions