User Manual

Category Setting item Default value
Firmware update
Download URL
firmware-update url http://
www.rtpro.yamaha.co.jp/firmware/
revision-up/swr2311p.bin
Allow revision-down don't allow
Timeout 300 sec
LLDP
Behavior enabled
Automatically set enabled
L2MS
Behavior enabled
Role slave
SYSLOG
Debug level log output OFF
Information level log output ON
Error level log output ON
SYSLOG server none
Access control
Telnet server status run
Telnet server access allow only VLAN #1
SSH server status do not run
TFTP server status do not run
HTTP server status run
HTTP server access allow only VLAN #1
Secure HTTP server status do not run
Maintenance VLAN VLAN interface VLAN #1
L2 switching
Automatic MAC address learning enabled
Automatic MAC address learning
aging time
300 sec
Spanning tree enabled
Proprietary loop detection disabled
DNS cliant Behavior enabled
Interface control PoE power supply enabled
Traffic control
QoS disabled
Flow control (IEEE 802.3x) disabled
Web GUI Language setting English
• Default settings per LAN/SFP port
Category Setting item Default value
Common setting
Speed/duplex mode setting auto
Cross/straight automatic detection enabled
MRU 1,522 Byte
Port description none
EEE disabled
Port Mode Access
Associated VLAN ID 1 (default VLAN)
L2MS L2MS filter disabled
Command Reference | Configuration | 25