User Manual

Category Setting item Default value
L2 switching
Spanning tree enabled
Proprietary loop detection enabled
Traffic control
QoS trust mode CoS
Flow control (IEEE 802.3x) disabled
Storm control disabled
PoE power supply
Power supply operation enabled
Power supply priority low
LLDP agent Transmit/Receive mode transmit and receive
• Settings for the default VLAN (vlan1)
• IPv4 Address : DHCP cliant
•
IGMP Snooping: Enable
• Querier : Disable
• Fast-Leave : Disable
• Check TTL : Enable
26 | Command Reference |
Configuration