User Manual

Client certificates to be sent are ZIP files, compressed using the passwords for each user.
E-mail cannot be sent to users whose e-mail addresses have not been set.
To send e-mail, the e-mail destination server and e-mail recipient name must be configured in the e-mail template, and an e-
mail template ID for use when sending the e-mail must be set using the mail send certificate command.
[Note]
Only the newest client certificate (1) can be sent via e-mail.
[Example]
This sends a client certificate via e-mail to the user with the “Yamaha” user ID.
SWR2311P#certificate export mail user Yamaha
10.1.15 Copying RADIUS data
[Syntax]
copy radius-server local src_config_num dst_config_num
[Parameter]
src_config_num : Copy source configuration number
Setting value Description
<0-4> Configuration #0-#4
sd Configuration on the SD card
dst_config_num : Copy destination configuration number
Setting value Description
<0-4> Configuration #0-#4
sd Configuration on the SD card
[Input mode]
priviledged EXEC mode
[Description]
This copies the entire set of data in connection with the local RADIUS server.
• Route certificate authority
•
Client certificates issued
• User data
• Management file
When you need to copy all settings including the command settings, you can use the copy startup-config command to copy.
[Note]
If an SD card that is not mounted is specified, an error will occur.
[Example]
This copies the config #0 RADIUS data to the SD card.
SWR2311P#copy radius-server local 0 sd
Succeeded to copy Radius configuration
10.1.16 Show RADIUS client (NAS) status
[Syntax]
show radius-server local nas host
[Parameter]
host : IP address or IP network address
Command Reference | Application | 291