User Manual

4.18.3 Clear SSH host information .......................................................................................................83
4.19 E-mail notification ....................................................................................................................................83
4.19.1 SMTP e-mail server settings .....................................................................................................84
4.19.2 SMTP e-mail server name settings ............................................................................................85
4.19.3 E-mail notification trigger settings ............................................................................................85
4.19.4 E-mail transmission template settings mode .............................................................................86
4.19.5 E-mail transmission server ID settings ......................................................................................86
4.19.6 E-mail transmission source address setting ...............................................................................86
4.19.7 Destination e-mail address setting for e-mail transmission .......................................................87
4.19.8 Setting for subject used when sending e-mails ..........................................................................87
4.19.9 Wait time settings for e-mail transmission ................................................................................88
4.19.10 E-mail settings when sending certificates ...............................................................................88
4.19.11 E-mail settings for certificate notification ...............................................................................89
4.19.12 Notification timing settings for expired certificates ................................................................89
4.19.13 Show e-mail transmission information ....................................................................................
90
4.20 LLDP ........................................................................................................................................................90
4.20.1 Enable LLDP function ...............................................................................................................90
4.20.2 Set system description ...............................................................................................................91
4.20.3 Set system name ........................................................................................................................91
4.20.4 Create LLDP agent ....................................................................................................................92
4.20.5 Set automatic setting function by LLDP ...................................................................................92
4.20.6 Set LLDP transmission/reception mode ....................................................................................93
4.20.7 Set type of management address ...............................................................................................93
4.20.8 Set basic management TLVs .....................................................................................................94
4.20.9 Set IEEE-802.1 TLV .................................................................................................................94
4.20.10 Set IEEE-802.3 TLV ...............................................................................................................95
4.20.11 Set LLDP-MED TLV ..............................................................................................................95
4.20.12 Set LLDP frame transmission interval ....................................................................................96
4.20.13 Set LLDP frame transmission interval for high speed transmission period ............................96
4.20.14 Set time from LLDP frame transmission stop until re-initialization .......................................96
4.20.15 Set multiplier for calculating time to live (TTL) of device information .................................97
4.20.16 Set number of LLDP frames transmitted during the high speed transmission period .............97
4.20.17 Set maximum number of connected devices manageable by a port ........................................98
4.20.18 Global interface setting for LLDP function .............................................................................98
4.20.19 Show interface status ...............................................................................................................99
4.20.20 Show information for connected devices of all interfaces ....................................................102
4.20.21 Clear LLDP frame counters ...................................................................................................103
4.21 L2MS (Layer 2 management service) settings .......................................................................................103
4.21.1 Move to L2MS mode ...............................................................................................................103
4.21.2 Set L2MS function ..................................................................................................................103
4.21.3 Set role of L2MS function .......................................................................................................104
4.21.4 Set L2MS slave watch interval ................................................................................................104
4.21.5 Set number of times that is interpreted as L2MS slave down .................................................105
4.21.6 Set terminal management function ..........................................................................................106
4.21.7 Set the device information acquisition time interval ...............................................................106
4.21.8 Set L2MS control frame transmit/receive ...............................................................................107
4.21.9 Reset slave management ..........................................................................................................107
4.21.10 Show L2MS information .......................................................................................................108
4.21.11 Set the device information acquisition time interval for downstream of a wireless AP .......109
4.21.12 Set event monitoring function ...............................................................................................109
4.21.13 Set event information acquisition time interval .....................................................................110
4.21.14 Set whether to use the L2MS slave's zero config function ....................................................110
Command Reference | TOC | 5