User Manual

Setting value Description
rmon When RMON event is executed
termmonitor When terminal monitoring is detected
bridge
When spanning tree root is detected / When
topology is changed
temperature
When temperature abnormality is detected or
resolved
fan When fan speed changes / When fan stops
powerethernet
When a change in PoE status occurs or an error
is detected
all
All trap types. All of the above trap types are
specified in the config.
[Initial value]
no snmp-server enable trap
[Input mode]
global configuration mode
[Description]
Specifies the type of trap notification that is sent.
If this command is executed with the "no" syntax, traps are disabled.
[Example]
Enable coldstart trap.
SWR2311P(config)#snmp-server enable trap coldstart
Disable traps.
SWR2311P(config)#no snmp-server enable trap
4.10.3 Set system contact
[Syntax]
snmp-server contact contact
no snmp-server contact
[Parameter]
contact : Name (maximum 255 characters) to register as the system contact
[Initial value]
no snmp-server contact
[Input mode]
global configuration mode
[Description]
Sets the MIB variable sysContact.
sysContact is a variable that is typically used to enter the name of the administrator or contact.
If this command is executed with the "no" syntax, the setting is deleted.
[Example]
Set the system contact to "[e-mail]".
SWR2311P(config)#snmp-server contact [e-mail]
54 | Command Reference | Maintenance and operation functions