User Manual

If this command is executed with the "no" syntax, the function is disabled.
[Example]
Start the HTTP server with 8080 as the listening port number.
SWR2311P(config)#http-server enable 8080
4.15.2 Start secure HTTP server and change listening port number
[Syntax]
http-server secure enable [
port]
http-server secure disable
no http-server secure
[Keyword]
enable : Enable the secure HTTP server
disable : Disable the secure HTTP server
[Parameter]
port : <1-65535>
Listening port number of the secure HTTP server (if omitted: 443)
[Initial value]
http-server secure disable
[Input mode]
global configuration mode
[Description]
Enables the secure HTTP server. You can also specify the listening TCP port number.
If this command is executed with the "no" syntax, the function is disabled.
If the secure HTTP server is enabled, encryption is performed in software, meaning that depending on the amount of traffic, the
CPU usage rate will rise.
To avoid a high usage rate, it is desirable to avoid access by multiple users to an automatically updated web page such as the
dashboard or the LAN map.
[Example]
Start the secure HTTP server with 8080 as the listening port number.
SWR2311P(config)#http-server secure enable 8080
4.15.3 Show HTTP server settings
[Syntax]
show http-server
[Input mode]
priviledged EXEC mode
[Description]
Shows the settings of the HTTP server. The following items are shown.
• HTTP server function enabled/disabled status
•
HTTP server's listening port number
• VLAN interface that is permitted to access the HTTP server
• Filter that controls access to the HTTP server
• Secure HTTP server function enabled/disabled status
• Log-in timeout time
[Example]
Show the settings of the HTTP server.
SWR2311P#show http-server
HTTP :Enable(80)
HTTPS:Disable
Command Reference | Maintenance and operation functions | 73