User Manual

4.19.2 SMTP e-mail server name settings
[Syntax]
mail server smtp id name server_name
no mail server smtp id
[Parameter]
id : <1-10>
E-mail server ID
server_name : Mail server name
(64 characters or less, single-byte alphanumeric characters and symbols other than ?)
[Initial value]
none
[Input mode]
global configuration mode
[Description]
Sets the name of the server used when sending e-mails.
[Example]
Sets the e-mail transmission server name to “test_mail_server”.
SWR2311P(config)#mail server smtp 1 name test_mail_server
4.19.3 E-mail notification trigger settings
[Syntax]
mail notify temp-id trigger lan-map
mail notify temp-id trigger terminal
mail notify temp-id trigger stack
no mail notify temp-id trigger lan-map
no mail notify temp-id trigger terminal
no mail notify temp-id trigger stack
[Keyword]
lan-map : Notify events related to the LAN map
terminal : Notify events related to the terminal monitoring function
stack : Notify events related to the stack function
[Parameter]
temp-id : <1-10>
E-mail template ID
Specify a template to use for event notification
[Initial value]
no mail notify
[Input mode]
global configuration mode
[Description]
Configures the settings for e-mail notification of event information for the specified function.
[Note]
Event notifications related to the stack function are only for models that support the stack function.
[Example]
Sets the LAN map error detection event trigger for e-mail template #1.
SWR2311P(config)#mail notify 1 trigger lan-map
Command Reference | Maintenance and operation functions | 85