User Manual

[Note]
The subject shown below will be used if this is not set.
• Event notification : Notification from SWR2311P
•
Certificate distribution : Certification publishment
• Certificate notification : Certification expiration
[Example]
Sets the subject to “TestMail” for e-mails sent using e-mail template #1.
SWR2311P(config)#mail template 1
SWR2311P(config-mail)#send subject TestMail
4.19.9 Wait time settings for e-mail transmission
[Syntax]
send notify wait-time time
no send notify wait-time
[Parameter]
time : <1-86400>
Transmission wait time (seconds)
[Initial value]
send notify wait-time 30
[Input mode]
E-mail template mode
[Description]
Sets the wait time before actually sending event-related notification e-mails.
[Note]
This setting is used as the wait time before event-related notification e-mails are sent.
[Example]
Sets the transmission wait time for e-mail template #1 to 60 seconds.
SWR2311P(config)#mail template 1
SWR2311P(config-mail)#send notify wait-time 60
4.19.10 E-mail settings when sending certificates
[Syntax]
mail send certificate temp-id
no mail send certificate
[Parameter]
temp-id : <1-10>
E-mail template ID
[Initial value]
no mail send certificate
[Input mode]
RADIUS configuration mode
[Description]
Specifies the template ID to use when sending RADIUS server client certificates.
The RADIUS server client certificate is sent to the e-mail address specified by the “user” command of the RADIUS server
function.
[Note]
Example of e-mail body text used when sending RADIUS server client certificates
---------------------------------
Certification is published.
88 | Command Reference | Maintenance and operation functions