User Manual
[Note]
The day is displayed in descending order, regardless of the order in which it was inputted.
[Example]
Sets the number of days to notify beforehand about expired term of validity for RADIUS server client certificates to “50 days
before” and “10 days before”.
SWR2311P(config-radius)#mail certificate expire-notify 50 10
4.19.13 Show e-mail transmission information
[Syntax]
show mail information [temp-id]
[Parameter]
temp-id : <1-10>
E-mail template ID
[Input mode]
priviledged EXEC mode
[Description]
Shows e-mail transmission information for the specified template ID.
If the template ID is omitted, this displays all e-mail information.
[Example]
Shows e-mail information for e-mail template #1.
SWR2311P#show mail information 1
Template ID : 1
Notify trigger : lan-map, terminal, stack
Server host : smtp-server.com
Server port : 25
Encryption : STARTTLS
Wait time : 30 sec
Mail address (from) : sample@test.com
Mail address (to) : user1@test.com
user2@test.com
user3@test.com
user4@test.com
4.20 LLDP
4.20.1 Enable LLDP function
[Syntax]
lldp run
no lldp run
[Initial value]
none
[Input mode]
global configuration mode
[Description]
Enable the LLDP function for the entire system.
If this command is executed with the "no" syntax, disable the LLDP function for the entire system.
[Note]
In order to enable the LLDP function for a port, the following command must be set.
Set the set lldp enable command's type (LLDP agent mode) to "txrx", "txonly", or "rxonly" as necessary.
• lldp run (global configuration mode)
• lldp-agent (interface mode)
• set lldp enable type (LLDP agent mode)
90 | Command Reference | Maintenance and operation functions