User Manual

4.20.4 Create LLDP agent
[Syntax]
lldp-agent
no lldp-agent
[Initial value]
none
[Input mode]
interface mode
[Description]
Create an LLDP agent, and transition to LLDP agent mode.
If this command is executed with the "no" syntax, delete the LLDP agent.
[Note]
When you delete the LLDP agent, the commands specified in LLDP agent mode are also deleted.
[Example]
Create an LLDP agent on port1.1, and transition to LLDP agent mode.
SWR2311P(config)#interface port1.1
SWR2311P(config-if)#lldp-agent
SWR2311P(lldp-agent)#
4.20.5 Set automatic setting function by LLDP
[Syntax]
lldp auto-setting switch
no lldp auto-setting
[Parameter]
switch : Set automatic setting function by LLDP
Setting value Description
enable Enable automatic setting function by LLDP
disable Disable automatic setting function by LLDP
[Initial value]
lldp auto-setting disable
[Input mode]
global configuration mode
[Description]
Enables the function by which LLDP frames transmitted by specific Yamaha devices can automatically modify the settings of a
switch.
The functions that can be set are flow control, QoS, IGMP snooping, and EEE.
If this command is executed with the "no" syntax, the setting returns to the default.
This can be set only for a physical interface.
[Note]
In order to use this function, you must use the set lldp enable command to enable reception of LLDP frames.
[Example]
Enable automatic setting function by LLDP.
SWR2311P(config)#lldp auto-setting enable
92 | Command Reference | Maintenance and operation functions