User Manual

English
Settings
SWR2311P-10G Owner’s Manual
29
Before changing the initial password for the initial administrative user name:
When the password is successfully authenticated, the system will wait for a new password to
be entered.
Skip to step 6 and change the password.
After changing the initial password for the initial administrative user name:
After the password is successfully authenticated, the command prompt appears to enable
entering commands. That completes the login process. (The remaining steps are not neces-
sary.)
6. Enter the new password and press the <Enter> key.
The system will wait for the new password to be re-entered.
7. Re-enter the same password as in step 6 and press the <Enter> key.
If the password is successfully changed, the command prompt will appear and entering
commands is enabled.
For details on the commands, refer to the command reference.
SWR2311P-10G Rev.2.02.24 (Fri Jul 15 09:36:55 2022)
Copyright (c) 2022 Yamaha Corporation. All Rights Reserved.
Please change the default password for admin.
New Password:
SWR2311P>
New Password:
New Password(Confirm):
Saving ...
Succeeded to write configuration
SWR2311P>