User Manual

English

Connections

SWR2311P-10G Owner’s Manual

3. To the connector, connect a fiber optic cable

that is suitable for each module.

■ Removing an SFP module

Secure this unit so that it will not move, and while grasping the lever of the SFP module, pull

it slowly toward yourself to remove the module from the SFP port.

NOTE

For details on installation, removal, and points of caution, refer to the “SFP-SWRG-LX SFP-

SWRG-SX Owner’s Manual” included with the SFP module.

1. Detach the fiber optic cable.

2. If the SFP module is connected to the upper

row of ports, lower the SFP module’s lever.

If it is connected to the lower row of ports, raise the lever.

Caution

Do not look into the optical emitter when the SFP module is installed.

The separately sold SFP modules are class 1 laser devices. They may emit laser beams

invisible to the eye. If the laser beam enters your eye, your eyesight might be damaged.

3. Grasp the lever and pull out the SFP module.

NOTE

Since this unit supports hot-swapping, an SFP module can be

removed without turning the power off.

Connector

Fiber optic cable

Connector

Lever