User Manual

Toolbar and display area
Yamaha LAN Monitor User Guide
17
1 Ping
You can ping one or more specified IP addresses. Select a radio button to specify which type of test you
want to execute.
Click the [Execute] button to start a ping test. The results of the ping test appear in the Result of searching area.
When you select [IP address] and execute a ping test, the Result of searching area displays the test results
regardless of whether there is a reply.
When you select [IP address range] and execute a ping test, the Result of searching area lists only the IP
addresses that replied.
[IP address]
Select this to ping a single IP address.
[IP address range]
Select this to ping a specified range of IP addresses.
From: Enter the starting IP address.
To: Enter the ending IP address.
[Number of target IP address:]
Shows the number of IP addresses in the specified range.
During a ping test, this shows the number of sent ping messages and the rate of progression.
[Execute]/[Stop] button
Click the [Execute] button to start a ping test.
During the ping test, this button switches to [Stop]. You can click this button to terminate the ping test.
2 Auto search in local network
This area shows the network information and the number of target IP addresses of the network to which the
selected network adapter belongs. Click the [Execute] button to start a search. The results of the search
appear in the Result of searching area.
The Result of searching area lists only IP addresses that replied.
[Local network:]
Shows the network information of the network to which the network adapter belongs.
[Number of target IP address:]
Shows the number of IP addresses to be searched. During a search, this shows the number of searched
IP addresses and the rate of progression.
[Execute]/[Stop] button
Click the [Execute] button to start a search.
During the search, this button switches to [Stop]. You can click this button to terminate the search.
3 Result of searching area
Shows the results of a ping test or an auto search in local network (page 36).
Important
Do not change the IP address and subnet mask of the selected network adapter during a search.
1
2
3