User Manual

Main screen
Yamaha LAN Monitor User Guide
26
Port settings
Click the [Port settings] tab, and then click a port number to display the following setting items.
VLAN ID tag
Configures the VLAN ID used for the VLAN.
Click the [New] button to display the “Create VLAN ID” dialog box.
Click the arrow ( ) to display the [Setting] button. Click the [Setting] button to display the
“VLAN ID” dialog box.
• Default
VLAN ID: The minimum unused ID from 101 to 132
Name: VLAN[VLAN ID]
Frame counter
reset
Resets the frame counter.
Click the [Execute] button to display a “Frame counter reset” confirmation message.
Firmware Update
Updates the firmware of the switch.
Click the [Execute] button to display the “Firmware Update” dialog box.
Restart
Restarts the switch.
Click the [Execute] button to display a “Restart” confirmation message.
Initialize
Initializes the switch.
Click the [Execute] button to display an “Initialize” confirmation message.
Basic functions
Configures the basic functions of the port.
Click the [Setting] button to display the “Basic functions” dialog box.
• Default
Port operation: Use
Automatic cross/straight detection: Use
Speed: Auto distinction (auto)
Link speed downshift: Use
Flow control: Not use
Loop detection: Use
Switch control frame interception: Not intercept
Data frame interception: Not intercept
QoS
Configures the QoS settings.
Transmit shaping and receive policing are shown only for SWX2200-24G. They are not shown for
SWX2200-8PoE or SWX2200-8G. Click the [Setting] button to display the “QoS” dialog box.
• Default
DSCP remarking: Not use
Transmit shaping: Not use
Receive policing: Not use
Tag VLAN
Configures the tag VLAN settings.
Click the arrow ( ) to display the [Setting] button. Click the [Setting] button to display the “Tag
VLAN” dialog box.
• Default
Operation mode: Access port
Access VLAN ID: default[VID=1]
Trunk VLAN ID: Not selected
Multiple VLAN
Configures the multiple VLAN settings.
Click the arrow ( ) to display the [Setting] button. Click the [Setting] button to display the
“Multiple VLAN” dialog box.
• Default
Joined group: Not selected
Frame counter
Configures the frame counter settings.
There are three items for SWX2200-8PoE and SWX2200-8G, or five items for SWX2200-24G.
Click the [Setting] button to display the “Frame counter” dialog box.
• Default
Transmitted frame: packets, total-good-packets, total-error-packets, fifo-drops, and collisions
Received frame: packets, total-good-packets, total-error-packets, fifo-drops, and crc-align-
errors