User Manual
Table Of Contents
- Information
- About Yamaha LAN Monitor
- Contents
- Terminology
- Steps to use the software
- Software operating requirements
- Notes
- Notes regarding device detection
- Notes regarding SWX2100/SWR2100P series PoE switch detection
- Notes regarding the power supply interruption function for the Yamaha PoE switch
- Notes regarding a slave with the stack function enabled
- Notes on printing and print preview of the “Whole map”
- Notes regarding detection of Dante-enabled devices
- Notes regarding when using macOS10.15.x or later
- Installing and uninstalling Yamaha LAN Monitor
- Starting and exiting Yamaha LAN Monitor
- Yamaha LAN Monitor screen structure
- Network settings on the computer
- Basic operation
- Menu bar
- Toolbar and display area
- Map screen
- List screen
- Configuring the device
- Update the firmware
- Import/Export the CONFIG
- Troubleshooting
List screen
Yamaha LAN Monitor for Mac User Guide
35
7 Device list
Displays a list of devices that support CONFIG import/export by LAN Monitor.
The items that will be displayed are as follows.
8 Check box
Used to select or deselect a device.
Check box
Used to select or deselect a device.
“Route”
The same contents as the “Switch / Wireless AP List” tab (page 31) will be displayed.
“Device Type”
The same contents as the “Switch / Wireless AP List” tab (page 31) will be displayed.
“Device name or Device
Label”
If a device label has been set, the device label will be displayed; otherwise, the device
name will be displayed.
“Model name”
The same contents as the “Switch / Wireless AP List” tab (page 31) will be displayed.
“Date and time of last
CONFIG import”
The same contents as the “Switch / Wireless AP List” tab (page 31) will be displayed.
“CONFIG file of last
import”
The same contents as the “Switch / Wireless AP List” tab (page 31) will be displayed.