User Manual

SWR2311P#show ddm status
Temperature High Alarm High Warning Low Warning Low Alarm
Interface (Celsius) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.9 34.6 90.0 85.0 -40.0 -45.0
port1.10 35.2 90.0 85.0 -40.0 -45.0
Voltage High Alarm High Warning Low Warning Low Alarm
Interface (V) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.9 3.28 3.60 3.50 3.10 3.00
port1.10 3.28 3.60 3.50 3.10 3.00
Current High Alarm High Warning Low Warning Low Alarm
Interface (mA) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.9 6.0 25.0 20.0 2.0 1.0
port1.10 7.0 25.0 20.0 2.0 1.0
TX-Power High Alarm High Warning Low Warning Low Alarm
Interface (dBm) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.9 -6.4570 -3.0008 -4.0001 -9.5001 -10.5012
port1.10 -6.0102 -3.0008 -4.0001 -9.5001 -10.5012
RX-Power High Alarm High Warning Low Warning Low Alarm
Interface (dBm) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.9 -40.0000 -2.0004 -3.0008 -17.0115 -18.0134
port1.10 -40.0000 -2.0004 -3.0008 -17.0115 -18.0134
5.1.16 SFP モジュールの受光レベル監視の設定
[書式]
sfp-monitor rx-power action
no sfp-monitor rx-power
[パラメーター]
action :
SFP モジュールの受光レベル監視の動作
設定値 説明
enable
SFP モジュールの受光レベル監視を有効に
する
disable
SFP モジュールの受光レベル監視を無効に
する
[初期設定]
sfp-monitor rx-power enable
[入力モード]
グローバルコンフィグレーションモード
[説明]
SFP モジュールの受光レベル監視を設定する。
[設定例]
SFP モジュールの受光レベル監視を無効にする。
SWR2311P(config)#sfp-monitor rx-power disable
5.2 リンクアグリゲーション
5.2.1 スタティック論理インターフェースの設定
[書式]
static-channel-group link-id
no static-channel-group
136 | コマンドリファレンス | インターフェース制御