User Manual

SWX3220(config)#interface port1.1
SWX3220(config-if)#port-security violation shutdown
5.4.4 Show port security information
[Syntax]
show port-security status
[Input mode]
privileged EXEC mode
[Description]
Shows the port security information.
[Example]
Show the port security information.
SWX3220#show port-security status
Port Security Action Status Last violation
-------- --------- --------- --------- -----------------
port1.1 Enabled Discard Blocking 00a0.de00.0003
port1.2 Disabled Discard Normal
port1.3 Disabled Discard Normal
port1.4 Disabled Discard Normal
port1.5 Disabled Discard Normal
port1.6 Disabled Discard Normal
port1.7 Disabled Discard Normal
port1.8 Disabled Discard Normal
port1.9 Disabled Discard Normal
port1.10 Disabled Discard Normal
5.5 Error detection function
5.5.1 Set automatic recovery from errdisable state
[Syntax]
errdisable auto-recovery function [interval interval]
no errdisable auto-recovery function
[Keyword]
interval : Automatic recovery time setting
[Parameter]
function : Functions that can be the cause of errdisable
Setting value Description
bpduguard BPDU guard function
loop-detect Loop detection function
interval : <10-1000000>
Time (seconds) until auto-recovery
[Initial value]
no errdisable auto-recovery bpduguard (BPDU guard function)
errdisable auto-recovery loop-detect 300 (Loop detection function)
[Input mode]
global configuration mode
[Description]
Enables the function that automatically recovers after the error detection function causes the errdisable state, and specifies the
time until automatic recovery.
If interval is omitted, 300 seconds is specified.
this is executed with the "no" syntax, the automatic recovery function is disabled.
190 | Command Reference | Interface control