User Manual

Hour setting examples Setting contents
12 12:00
12.13 12:00 and 13:00
12- From 12:00 to 23:00
10-20 From 10:00 to 20:00
-20 From 0:00 to 20:00
* Hourly
Minute setting examples Setting contents
30 30 minutes
15.45 15 minutes and 45 minutes
30- From 30 minutes to 59 minutes
15-45 From 15 minutes to 45 minutes
-45 From 0 minutes to 45 minutes
* Each minute
event : Event
Setting value Description
startup When booting
sd-attached When attaching a microSD card
template_id : <1-10>
Schedule template number
[Initial value]
None
[Input mode]
global configuration mode
[Description]
When setting the schedule using “time,” this executes the actions listed in the specified schedule template at the specified
time(s).
When setting the schedule using “event,” this executes the actions listed in the specified schedule template when the specified
events occur.
If this command is executed with the "no" syntax, the schedule with the specified ID is deleted.
[Note]
When multiple schedules are executed at the same time, they are executed beginning with the schedule with the smallest ID.
When specifying the day, you cannot specify using a mix of numbers and weekdays.
If the seconds are omitted, the settings will be the same as when specifying “00” seconds.
For the month and days settings, you can specify ranges using “-” and “,” characters, and you can specify all dates using the “*”
character. Note that for the seconds setting, you cannot specify ranges using “-” and “,” characters, nor can you specify all dates
using the “*” character.
[Example]
This sets schedule #1 to execute schedule template #1 every Monday at exactly 0:00, 1:00, 2:00, 12:00, 21:00, 22:00 and 23:00.
SWX232x(config)#schedule time */mon -2,12-14,21-:0 1
130 | Command Reference | Maintenance and operation functions