User Manual

• If the rack cabinet has a door, use sufficient care to ensure that it does not
interfere with communication cables or the power cord after this product is
installed.

Memo
• Screws for fastening this product to the 19-inch rack are not included.
The 19-inch rack mount hardware can be attached to this product using either of the following two
methods.
Method A: Attach the 19-inch rack mount hardware so
that its rack screw surface is flush with the front panel
of this product.
This is the usual mounting method.
Method B: Install the product 4 cm deeper than method A.
If the 19-inch rack has a door, install this product in a
recessed position so that LAN cables inserted into the front
panel of the product do not touch the door of the rack.
3. Installation
16 | L3 SWITCH SWX3220-16MT User Guide