User Manual

6. Align the product with the mounting accessory.
7. Use the included screws (flat-headed, M3×8L, diameter: 3.0 mm, length: 8.0 mm, screw head
diameter: 5.5 mm) (6) to install the mounting accessory onto this product. Use a Phillips
screwdriver to firmly fasten the screws.

Warning
•
Use only the screws that were included.
If the product falls, you may be injured or the product may become damaged.
This could also cause electric shock or malfunctions.

Caution
• Take care when letting your hand or finger contact the corners of the
mounting accessory.
Inattention might cause injury.
3. Installation
L3 SWITCH SWX3220-16MT User Guide | 19