User Manual

8. Engage the assembled mounting accessory onto the commercially available screws that you
provisionally installed on the wall or ceiling, and slide it to the side.
The illustration below shows an example of an installation with the back of the product facing
up.

Warning
•
Do not install with the front panel facing up.
Failing to do so could cause malfunctions or fire.

Caution
•
Do not let the product fall.
If the product falls, you may be injured or the product may become damaged.

Caution
• When installing the product with its side facing up, engage the mounting
accessory with the screws that you provisionally installed, and slide the
mounting accessory either to the left or right.
9. Further tighten the screws that you provisionally attached.
10. Install the commercially available screws in the fastening screw holes (two locations) of the
mounting accessory to secure the product in place.

Caution
• You must use screws that are appropriate for the material of the wall or
ceiling.
If the product falls, you may be injured or the product may become damaged.
3. Installation
20 | L3 SWITCH SWX3220-16MT User Guide