User Manual

Before changing the initial password for the initial administrative user name：
When the password is successfully authenticated, the system will wait for a new
password to be entered.
Skip to step 7 and change the password.
SWX3220-16MT Rev.4.02.10 (Fri Jul 15 09:31:48 2022)
Copyright (c) 2018-2022 Yamaha Corporation. All Rights Reserved.
Please change the default password for admin.
New Password:
After changing the initial password for the initial administrative user name：
After the password is successfully authenticated, the command prompt appears to enable
entering commands. That completes the login process. (The remaining steps are not
necessary.)
SWX3220>
7. Enter the new password and press the [Enter] key.
New Password:
The system will wait for the new password to be re-entered.
8. Re-enter the same password as in step 7 and press the [Enter] key.
New Password(Confirm):
If the password is successfully changed, the command prompt will appear and entering commands
is enabled.
Saving ...
Succeeded to write configuration
SWX3220>

Memo
• For details on the commands, refer to the “Command reference” (on the
Yamaha website).
5. Settings
34 | L3 SWITCH SWX3220-16MT User Guide