User Manual

5.4. Making settings using the Web GUI
This explains how to log in to this product using the Web GUI.
For details on compatible Web browsers, refer to the website listed below.
Web browser compatibility with Web GUI on Yamaha network products:
https://www.yamahaproaudio.com/
5.4.1. Logging in to this product using a Web browser
1. Connect this product to the computer with a LAN cable.
2.
Check the power supply of this product.
If this product is not powered on, turn on the power as described in “Connecting the power
cord”. Once the power is on, go to step 3.
3.
Launch the Web browser and access “http://(IP address of this product)/.”
When access is successful, a login screen appears where you can enter a user name and password.

Memo
◦ The IP address of this product is set to “192.168.100.240/24” by default
when shipped from the factory.
◦ If this product is not connected to a network, change the IP address of
the computer to use for settings to the “192.168.100.0/24” segment.
See the help documentation of your computer for how to change the
computer’s IP address.
4.
Enter the user name and password, and click the "Login" button.
If settings are set to factory settings, enter “admin” as the initial administrative user and
“admin” as the password.
If settings are set to factory settings, a language selection screen is displayed after
successfully logging in.

Memo
◦ If an incorrect user name or password is entered three consecutive
times, logging in to the product is disabled for one minute thereafter. If
that occurs, wait at least one minute before trying again from step 4.
5.
Select the language to use.
If factory settings are specified, a screen for changing the password is displayed after login.

Memo
◦ The user language can also be changed via the Web GUI after login.
6.
Enter the new password in both fields and then click the “Save” button.
If the password was successfully changed, the top screen of the Web GUI is displayed.
5. Settings
L3 SWITCH SWX3220-16MT User Guide | 37