User Manual

[Keyword]
enable : Use the L2MS agent's zero config function
disable : Don't use the L2MS agent's zero config function
[Initial value]
config-auto-set enable
[Input mode]
L2MS mode
[Description]
Sets whether to use the L2MS agent device's zero config function.
If the zero config function is enabled, and the L2MS agent's Yamaha switch or wireless AP settings (config) are saved, the
saved settings (config) are automatically applied when the L2MS agent in its factory-set state is connected to the network.
If this command is executed with the "no" syntax, the setting returns to the default.
[Note]
Synchronization of settings for a agent SWX2200 is performed regardless of this setting.
[Example]
Use the L2MS agent's zero config function.
SWX3220(config)#l2ms configuration
SWX3220(config-l2ms)#l2ms enable
SWX3220(config-l2ms)#l2ms role manager
SWX3220(config-l2ms)#config-auto-set enable
4.25 Snapshot
4.25.1 Set snapshot function
[Syntax]
snapshot enable
snapshot disable
no snapshot
[Keyword]
enable : Snapshot function is enabled
disable : Snapshot function is disable
[Initial value]
snapshot disable
[Input mode]
global configuration mode
[Description]
Enables the snapshot function.
If this command is executed with the "no" syntax, disables the snapshot function.
[Note]
This command is valid only if L2MS is operating as manager.
[Example]
Enable the snapshot function.
SWX3220(config)#snapshot enable
4.25.2 Set whether to include terminals in the snapshot comparison
[Syntax]
snapshot trap terminal [except-wireless]
no snapshot trap terminal
134 | Command Reference | Maintenance and operation functions