User Manual

SWX3220(config-dhcp)#option time_server 192.168.100.240
10.1.17 Show information of DHCP pool
[Syntax]
show dhcp pool [pool_name]
[Parameter]
pool_name : Pool name
Pool name to show
[Input mode]
unprivileged EXEC mode, privileged EXEC mode
[Description]
Shows information of DHCP pool.
When POOL_NAME is specified, only the information for the specified POOL_NAME will be shown.
The following items are shown.
• DHCP pool na,e
• Network address
• IP address assigned as static
• Range of IP addresses assigned dynamically
• Lease time
• Sub netmask
• Duplication check
• Total number of dynamically assigned IP addresses, and quantity of each
[Note]
If network is not enabled for the DHCP pool, this will not be shown.
"Total number of dynamically assigned IP addresses, and quantity of each" is only displayed when the DHCP server settings
are enabled.
Large amounts of lease information may take time to display.
[Example]
Show the current pool status.
SWX3220#show dhcp pool
Pool: p1
network: 192.168.100.0/24
address ranges:
addr: 192.168.100.2 to 192.168.100.191
static host addresses:
lease <days:hours:minutes:seconds> <120:23:59:59>
sub netmask: 255.255.255.0
Probe:
Status: Enabled
Timeout: 1
Dynamic addresses:
Total: 189
Leased: 1
10.1.18 Show IP address assignment information for DHCP clientsDHCP
[Syntax]
show dhcp binding [pool_name]
[Parameter]
pool_name : Pool name
Pool name to show
[Input mode]
unprivileged EXEC mode, privileged EXEC mode
Command Reference | Application | 455