User Manual

10.4.7 Authenticated user settings
[Syntax]
user userid password [vlan vlan-id] [mac mac-address] [ssid ssid] [name name] [mail mail-address] [auth type] [expire
date]
no user userid
[Keyword]
vlan : Set the VLAN for dynamic VLAN
mac : Specify the terminal’s MAC address when you want to specify an authentication terminal
ssid : Specify the SSID when you want to specify a connected SSID
name : Specify the user name
mail : Set the e-mail addresses to which client certificates will be distributed
auth : Set the authentication method type
expire : Set the term of validity for the client certificate (this is enabled only when the authentication method
is EAP-TLS)
[Parameter]
userid : User ID
(within 3–32 characters; cannot specify “DEFAULT”)
Authentication method Characters that can be inputted
EAP-MD5, EAP-TTLS, PEAP, PAP
Single-byte alphanumeric characters and
symbols other than the characters \ [ ] " ? and
spaces
EAP-TLS
Single-byte alphanumeric characters and
symbols other than the characters \ [ ] " ? and
spaces
password : Password
(32 characters or less, single-byte alphanumeric characters and symbols other than the characters \ [ ]
" ? and spaces )
vlan-id : <1-4094>
VLAN number for dynamic VLAN
mac-address : hhhh.hhhh.hhhh (h is hexadecimal)
MAC address for terminal (user) to authenticate
ssid : SSID connection point
(32 characters or less, single-byte alphanumeric characters and symbols other than the characters \ [ ]
" ? and spaces )
name : User name
(32 characters or less, single-byte alphanumeric characters and symbols other than the characters " ?
and spaces
mail-address : Mail address
(256 characters or less, single-byte alphanumeric characters and _ - . @)
type : Type of authentication method
Command Reference | Application | 467