User Manual

If line is set to 0, the display is not paused per page.
If this command is executed with the "no" syntax, the number of lines is set to 24 in the case of a serial console, or to the
window size when connected in the case of VTY.
[Note]
After this command is executed, the setting is applied starting at the next login.
If the terminal length command is executed, the result of executing the terminal length command takes priority.
[Example]
Change the number of lines displayed per page for the terminal in use to 100 lines.
SWX3220(config)#service terminal-length 100
SWX3220(config)#
4.10.6 Changing the serial baud rate
[Syntax]
baudrate select baudrate
[Parameter]
baudrate : 9600, 19200, 38400, 57600, 115200
Serial baud rate (bps)
[Initial value]
baudrate select 9600
[Input mode]
privileged EXEC mode
[Description]
This sets the serial baud rate.
[Example]
Sets the serial baud rate to 115200.
SWX3220#baudrate select 115200
4.11 Management
4.11.1 Set management VLAN
[Syntax]
management interface interface
no management interface
[Parameter]
interface : VLAN interface name
[Initial value]
management interface vlan1
[Input mode]
global configuration mode
[Description]
Set the VLAN that is used for management.
By setting this command, it will be possible to set and acquire the IP address assigned by the L2MS manager to the
corresponding VLAN when operating as an L2MS agent.
If this is executed with the "no" syntax, or if the VLAN is deleted, this command also returns to the default settings.
64 | Command Reference | Maintenance and operation functions