User Manual

6.2.3 Set private VLAN.........................................................................................................................................212
6.2.4 Set secondary VLAN for primary VLAN....................................................................................................213
6.2.5 Set access port (untagged port)....................................................................................................................214
6.2.6 Set associated VLAN of an access port (untagged port)..............................................................................214
6.2.7 Set trunk port (tagged port)..........................................................................................................................215
6.2.8 Set associated VLAN for trunk port (tagged port).......................................................................................216
6.2.9 Set native VLAN for trunk port (tagged port)..............................................................................................217
6.2.10 Set private VLAN port type.......................................................................................................................217
6.2.11 Set private VLAN host port.......................................................................................................................218
6.2.12 Set promiscuous port for private VLAN....................................................................................................219
6.2.13 Set voice VLAN.........................................................................................................................................220
6.2.14 Set CoS value for voice VLAN..................................................................................................................220
6.2.15 Set DSCP value for voice VLAN...............................................................................................................221
6.2.16 Set multiple VALN group..........................................................................................................................221
6.2.17 Set name of multiple VLAN group............................................................................................................222
6.2.18 Configuring the YMPI frame transmission when multiple VLANs are configured..................................222
6.2.19 Show VLAN information...........................................................................................................................223
6.2.20 Show private VLAN information...............................................................................................................224
6.2.21 Show multiple VLAN group setting information......................................................................................224
6.3 STP (Spanning Tree Protocol)....................................................................................................................................225
6.3.1 Set spanning tree for the system...................................................................................................................225
6.3.2 Set forward delay time.................................................................................................................................225
6.3.3 Set maximum aging time..............................................................................................................................226
6.3.4 Set bridge priority.........................................................................................................................................226
6.3.5 Set spanning tree for an interface.................................................................................................................227
6.3.6 Set spanning tree link type...........................................................................................................................227
6.3.7 Set interface BPDU filtering........................................................................................................................228
6.3.8 Set interface BPDU guard............................................................................................................................228
6.3.9 Set interface path cost...................................................................................................................................229
6.3.10 Set interface priority...................................................................................................................................230
6.3.11 Set edge port for interface..........................................................................................................................230
6.3.12 Show spanning tree status..........................................................................................................................231
6.3.13 Show spanning tree BPDU statistics..........................................................................................................233
6.3.14 Clear protocol compatibility mode.............................................................................................................234
6.3.15 Move to MST mode...................................................................................................................................234
6.3.16 Generate MST instance..............................................................................................................................235
6.3.17 Set VLAN for MST instance......................................................................................................................235
6.3.18 Set priority of MST instance......................................................................................................................236
6.3.19 Set MST region name.................................................................................................................................236
6.3.20 Set revision number of MST region...........................................................................................................237
6.3.21 Set MST instance for interface...................................................................................................................237
6.3.22 Set interface priority for MST instance......................................................................................................237
6.3.23 Set interface path cost for MST instance....................................................................................................238
6.3.24 Show MST region information..................................................................................................................239
6.3.25 Show MSTP information...........................................................................................................................239
6.3.26 Show MST instance information................................................................................................................240
6.4 Loop detection.............................................................................................................................................................241
6.4.1 Set loop detection function (system)............................................................................................................241
6.4.2 Set loop detection function (interface).........................................................................................................242
6.4.3 Set port blocking for loop detection.............................................................................................................243
6.4.4 Detects Port Blocking loop clearing at regular intervals..............................................................................243
6.4.5 Reset loop detection status...........................................................................................................................244
6.4.6 Show loop detection function status.............................................................................................................244
Chapter 7: Layer 3 functions...........................................................................................246
7.1 IPv4 address management...........................................................................................................................................246
7.1.1 Set IPv4 address...........................................................................................................................................246
7.1.2 Show IPv4 address.......................................................................................................................................246
7.1.3 Automatically set IPv4 address by DHCP client.........................................................................................247
7.1.4 Show DHCP client status.............................................................................................................................248
7.1.5 Set auto IP function......................................................................................................................................248
7.2 IPv4 route control........................................................................................................................................................249
7.2.1 Set static IPv4 route......................................................................................................................................249
7.2.2 Set number of equal-cost multi-path registrations.......................................................................................250
8 | Command Reference | Contents