User Manual

Table Of Contents

If multiple Yamaha router or switches are connected to one computer,

the COM port numbers assigned to the connection might be swapped

inadvertently. Use care to ensure that you do not change the settings of

an unintended device.

Check the power supply of this product.

If this product is not powered on, turn on the power as described in “Connecting the power

cord”. When this product powers-on and the command line is usable, a startup message appears

in the console screen of the computer.

If the power is already on, a startup message does not appear.

For the SWX2320-16MT

SWX2320-16MT Rev.2.05.10 (Fri Jul 15 09:38:44 2022)

Press the [Enter] key.

The system waits for a user name to be entered.

Enter the user name and press the [Enter] key.

If factory settings are specified, enter the initial administrative user name “admin”.

Username: admin

The system will wait for a password to be entered.

Enter the user password specified in step 4 and press the [Enter] key.

If factory settings are specified, enter the initial administrative password “admin”.

Password:



Memo

◦ Character strings entered in the password field are not displayed on the

console screen.

(The same thing applies in the steps below.)

◦ If an incorrect password is entered three consecutive times, logging in to

the product is disabled for one minute thereafter. If that occurs, wait at

least one minute before trying again from step 4.

Before changing the initial password for the initial administrative user name：

When the password is successfully authenticated, the system will wait for a new

password to be entered.

Skip to step 6 and change the password.

SWX2320-16MT Rev.2.05.10 (Fri Jul 15 09:38:44 2022)

Please change the default password for admin.

5. Settings

L2 SWITCH SWX2320-16MT User Guide | 31