User Manual
Table Of Contents
New Password:
After changing the initial password for the initial administrative user name:
After the password is successfully authenticated, the command prompt appears to enable
entering commands. That completes the login process. (The remaining steps are not
necessary.)
SWX2320>
6. Enter the new password and press the [Enter] key.
New Password:
The system will wait for the new password to be re-entered.
7. Re-enter the same password as in step 6 and press the [Enter] key.
New Password(Confirm):
If the password is successfully changed, the command prompt will appear and entering commands
is enabled.
Saving ...
Succeeded to write configuration
SWX2320>
Memo
• For details on the commands, refer to the “Command reference” (on the
Yamaha website).
5. Settings
32 | L2 SWITCH SWX2320-16MT User Guide