User Manual
Table Of Contents
Before changing the initial password for the initial administrative user name:
When the password is successfully authenticated, the system will wait for a new
password to be entered.
Skip to step 7 and change the password.
SWX2320-16MT Rev.2.05.10 (Fri Jul 15 09:38:44 2022)
Copyright (c) 2020-2022 Yamaha Corporation. All Rights Reserved.
Please change the default password for admin.
New Password:
After changing the initial password for the initial administrative user name:
After the password is successfully authenticated, the command prompt appears to enable
entering commands. That completes the login process. (The remaining steps are not
necessary.)
SWX2320>
7. Enter the new password and press the [Enter] key.
New Password:
The system will wait for the new password to be re-entered.
8. Re-enter the same password as in step 7 and press the [Enter] key.
New Password(Confirm):
If the password is successfully changed, the command prompt will appear and entering commands
is enabled.
Saving ...
Succeeded to write configuration
SWX2320>
Memo
• For details on the commands, refer to the “Command reference” (on the
Yamaha website).
5. Settings
34 | L2 SWITCH SWX2320-16MT User Guide