User Manual

The product switches from command input mode to global configuration mode.
SWX2320#configure terminal
Enter configuration commands, one per line.End with CNTL/Z.
SWX2320(config)#
4. Use the “ssh-server enable” command to enable the SSH server functionality.
SWX2320(config)#ssh-server enable
SWX2320(config)#
5. Register a user with password using the “username” command.

Important
◦ You must supply a user name and password when logging in via SSH. Make
sure to register a user with password ahead of time.
Example: User name: yamaha; password: 1a2b3c4d
SWX2320(config)#username yamaha password 1a2b3c4d
SWX2320(config)#
6.
Type “exit” and press the [Enter] key.
The product returns to privileged EXEC mode.
SWX2320(config)#exit
SWX2320#
7. Save the settings as necessary.
SWX2320#write
Succeeded to write configuration
SWX2320#

Memo
• For details on the commands, refer to the “Command reference” (on the
Yamaha website).
• Refer to the owner’s manual of the SSH client you are using for the SSH client
settings and operations.
5. Settings
36 | L2 SWITCH SWX2320-16MT User Guide