Service manual

4-9
FUEL
E
CARBURETOR
E32000-1*
INSPECTION
CARBURETOR BODY
1. Inspect the carburetor body for cracks
or clogging of the passages.
NEEDLE VALVE
1. Inspect the needle valve for free move-
ment and wear and replace if required.
PILOT SCREW
1. Inspect the pilot screw for wear and
replace if required.
COLLAR
1. Inspect the collar at the end of the accel-
erator-arm for wear and replace if
required.
FLOAT
1. Visually inspect the float for damage or
cracks and replace if required.
2. Measure the float height a. If it is more
than 2 mm (0.08 in) greater or less than
the specified float height, recheck the
valve seat and needle-valve.