Service manual

4-1
ENG
REMOVING THE ENGINE
EASF0018
ENGINE
REMOVING THE ENGINE
NOTE:
It is not necessary to remove the engine in order
to remove the following components.
9
Cylinder head
9
Cylinder
9
Piston
9
Clutch
9
Shift shaft
9
Oil pump
9
Generator
9
Starter clutch
1. Remove:
9
side cowlings (left and right)
9
front cowling
9
center panels (upper and lower)
9
rear cowlings (left and right)
Refer to “COVERS” in chapter 3.
9
drive sprocket
Refer to “DRIVE CHAIN AND SPROCK-
ETS” in chapter 7.
COOLING SYSTEM
1. Drain:
9
coolant
(completely from the water jacket)
Refer to “CHANGING THE COOLANT” in
chapter 3.
2. Remove:
9
radiator assembly
9
water pump assembly
Refer to “RADIATOR” and “WATER PUMP”
in chapter 5.
ENGINE OIL
1. Drain:
9
engine oil
(completely from the crankcase)
Refer to “CHANGING THE ENGINE OIL” in
chapter 3.
CARBURETOR
1. Remove:
9
carburetor assembly
Refer to “CARBURETOR” in chapter 6.
http://mototh.com