Service manual

4-41
ENG
GENERATOR AND STARTER CLUTCH
2
1
a
EAS00351
CHECKING THE STARTER CLUTCH
(T135SE)
1. Check:
9
starter clutch rollers
1
Damage/wear
→
Replace.
2. Check:
9
starter clutch idle gear
1
9
starter clutch gear
2
Burrs/chips/roughness/wear
→
Replace the
defective part(s).
3. Check:
9
starter clutch gear contacting surfaces
a
Damage/pitting/wear
→
Replace the starter
clutch gear.
4. Check:
9
starter clutch operation
✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭
a. Install the starter clutch gear
1
onto the
starter clutch and hold the starter clutch.
b. When turning the starter clutch gear clock-
wise
å
, the starter clutch and the starter
clutch gear should engage, otherwise the
starter clutch is faulty and must be
replaced.
c. When turning the starter clutch gear coun-
terclockwise
∫
, it should turn freely, other-
wise the starter clutch is faulty and must be
replaced.
✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬
http://mototh.com