Service manual

ManualsBrandsYamaha ManualsAutomotiveT135 SE

4-42

ENG

GENERATOR AND STARTER CLUTCH

3

1

2

EAS00355

INSTALLING THE STARTER CLUTCH

(T135SE)

1. Install:

9

starter clutch

1

NOTE:

9

While holding the generator rotor

2

with the

sheave holder, tighten the starter clutch bolt.

9

Do not allow the sheave holder to touch the

projection on the generator rotor.

9

Lock the threads on the starter clutch bolts by

staking them with a center punch.

EAS00353

INSTALLING THE GENERATOR

1. Install:

9

woodruff key

9

generator rotor

9

generator rotor nut

NOTE:

9

Clean the tapered portion of the crankshaft

and the generator rotor hub.

9

When installing the generator rotor, make sure

the woodruff key is properly sealed in the key-

way of the crankshaft.

2. Tighten:

9

generator rotor nut

1

NOTE:

9

While holding the generator rotor

2

with the

sheave holder

3

, tighten the generator rotor

nut.

9

Do not allow the sheave holder to touch the

projection on the generator rotor.

Sheave holder

90890-01701

Sheave holder

90890-01701

14 Nm (1.4 m•kg, 10 ft•lb)

70 Nm (7.0 m•kg, 50 ft•lb)

http://mototh.com