Service manual

ENG
1
2
5
4
3
6
7
8
4-52
CLUTCH
11. Remove:
9
collar
1
9
clutch shoe housing
2
9
washer
3
9
rollers
4
9
cage springs
5
9
cage
6
9
clutch shoe housing boss
7
9
clutch shoe
8
EAS00280
CHECKING THE FRICTION PLATES
The following procedure applies to all of the fric-
tion plates.
1. Check:
9
friction plate
Damage/wear
→
Replace the friction plates
as a set.
2. Measure:
9
friction plate thickness
Out of specification
→
Replace the friction
plates as a set.
NOTE:
Measure the friction plate at four places.
EAS00281
CHECKING THE CLUTCH PLATES
The following procedure applies to all of the
clutch plates.
1. Check:
9
clutch plate
Damage
→
Replace the clutch plates as a
set.
2. Measure:
9
clutch plate warpage
(with a surface plate and thickness gauge
1
)
Out of specification
→
Replace the clutch
plates as a set.
Friction plate thickness
2.5 – 2.7 mm (0.010 – 0.11 in)
<Limit>: 2.4 mm (0.0945 in)
Clutch plate warpage limit
0.05 mm (0.0020 in)
http://mototh.com