Service manual

ENG
4-66
CRANKCASE AND CRANKSHAFT
2. Measure:
9
big end side clearance
Out of specification
→
Replace the crank-
shaft.
3. Measure:
9
crankshaft width
Out of specification
→
Replace the crank-
shaft.
4. Check:
9
crankshaft sprocket
1
Damage/wear
→
Replace the crankshaft.
9
bearing
2
Cracks/damage/wear
→
Replace the crank-
shaft.
5. Check:
9
crankshaft journal
Scratches/wear
→
Replace the crankshaft.
Big end side clearance
0.11 – 0.41 mm
(0.0043 – 0.0161 in)
Crankshaft width
45.95 – 46.00 mm
(1.809 – 1.811 in)
http://mototh.com