Service manual

ENG
4-80
TRANSMISSION
21.1~21.3 mm
1
2
4
2
3
1
4. Check:
9
transmission gear engagement
(each pinion gear to its respective wheel
gear)
Incorrect
→
Reassemble the transmission
axle assemblies.
NOTE:
When reassembling the drive axle, press the
2nd wheel gear
1
onto the drive axle
2
as
shown.
5. Check:
9
transmission gear movement
Rough movement
→
Replace the defective
part(s).
6. Check:
9
circlips
Bends/damage/looseness
→
Replace.
EAS00426
INSTALLING THE TRANSMISSION
1. Install:
9
shift fork guide bar
1
9
shift fork “R”
2
9
shift fork “L”
3
9
shift drum
4
NOTE:
9
The embossed marks on the shift forks should
face towards the right side of the engine and
be in the following sequence :
“R”, “L”.
9
Be sure install the side plate into the slot on
the shift drum.
http://mototh.com