Service manual

EAS00467
INSTALLING THE THERMOSTAT
1. Install:
9
thermostat
1
9
thermostat cover
2
9
bracket
NOTE:
Face the hole toward to the forward to install.
5-8
COOL
COOLINGSYSTEM
2
1
FWD
10 Nm (1.0 m•kg, 7.2 ft•lb)
EAS00475
ASSEMBLING THE WATER PUMP
1. Install:
9
water pump seal
1
NOTE:
Install the water pump seal with the special
tools.
å
Push down.
2. Lubricate:
9
water pump seal
1
Mechanical seal installer
90890-04145
22
Middle driven shaft bearing driver
90890-04058
33
Recommended lubricant
Lithium soap base grease
3. Install:
9
impeller
9
plate
NOTE:
9
Align the slit in the impeller shaft with the slot
of the plate.
9
After installation, check that the impeller shaft
rotates smoothly.
10 Nm (1.0 m•kg, 7.2 ft•lb)
http://mototh.com