Service manual

CHAS
REAR SHOCK ABSORBER ASSEMBLYAND SWINGARM
7-51
2
1
3
5. Remove:
9
rear shock absorber bolt (upper and lower)
1
9
washer
9
rear shock absorber nut (upper and lower)
2
9
washers
9
rear shock absorber assembly
3
å
∫
6. Measure:
9
swingarm side play
9
swingarm vertical movement
✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭✭
a. Measure the tightening torque of the
swingarm pivot shaft nut.
b. Measure the swingarm side play
å
by mov-
ing the swingarm from side to side.
c. If the swingarm side play is out of specifica-
tion, check the spacers and bearings.
d. Check the swingarm vertical movement
∫
by moving the swingarm up and down.
If swingarm vertical movement is not
smooth or if there is binding, check the
washer and bushings.
✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬✬
Swingarm side play (at the end of
the swingarm)
1 mm (0.04 in)
Pivot shaft nut
66 Nm (6.6 m·kg, 43 ft·lb)
http://mototh.com