Service manual

CHAS
DRIVE CHAIN AND SPROCKETS
7-58
4. Check:
9
drive chain rollers
1
Damage/wear
→
Replace the drive chain.
9
drive chain side plates
2
Cracks/damage/wear
→
Replace the drive
chain.
5. Lubricate:
9
drive chain
6. Check:
9
drive sprocket
9
driven sprocket
Worn more than 1/4 tooth
a
→
Replace the
drive chain and sprockets as a set.
Bent teeth
→
Replace the drive chain and
sprockets as a set.
b
Correct
1
Drive chain roller
2
Drive chain sprocket
New
1
2
1
EAS00714
INSTALLING THE DRIVE CHAIN AND
SPROCKETS
1. Install:
9
driven sprocket
2
9
lock washers
1
9
driven sprocket bolts
9
driven sprocket nuts
NOTE:
Tighten the bolts in a crisscross pattern.
2. Bend:
9
lock washer tab
1
NOTE:
Bend the lock washer tabs along a flat side of
each bolt.
Recommended lubricant
Engine oil or chain lubricant
suitable for non-O-ring chains
30 Nm (3.0 m·kg, 22 ft·lb)
http://mototh.com